GM BLU -Cadillac/Chevy/Buick/GMC/SAAB
Manual for all Buick/Chevrolet/Cadillac/GMC Vehicle
Do not click the video prior to reading the text below
using windows or google, chrome computer got to
https://config.navtool.com/ (desktop or laptop only)
Correction to video manual For NEW NavTool 6.0 - NBT
🆕-- NEW there is no need to connect anything behind the screen any longer
🆕-- NEW audio is also now pre-wired into the harness, no need for AUDIO RCA
🆕-- NEW NEW OSD menu https://vimeo.com/641958396
There is no longer a need to connect anything back of the screen as show in the video, below is a correction to the video.
step 1 unplug Blue connector back of the radio
step 2 plug in factory male connector into NavTool supplied female connector
step 3 connect other end of the supplied connector into the middle brown connector on NavTool plug
step 4 connect remaining connector into the back of the radio
step 5 connect other end of the cable to brown outer jack on NavTool
-- please keep in mind audio cables are now pre-wired, no need to connect RCA
-- NEW if screen flashing after installation, or you see image for a split second and then screen becomes black - CLICK HERE TO WATCH THE VIDEO
-- installation video (please keep in mind you have received NEW NavTool 5.0 so 2 correction above should be taken into account) installation video - CLICK HERE TO WATCH THE VIDEO
AUDIO:
Set Radio To AUX
If AUX is Grayed out then insert supplied 3.5mm dummy plug into vehicles 3.5mm aux jack
Disable Bluetooth audio streaming, not calling but just audio streaming, usually done from car radio, in bluetooth audio settings.
If you don't disable Bluetooth audio, phone will force audio to Bluetooth instead of AUX